Anticorrosive tile is a very widely used material in our life, which has been recognized and used by the majority of people in the construction industry. So in the process of using the anti-corrosion tile, what situation needs to be reinforced? Anticorrosive tile manufacturers take you to know these!

1. If the slope of the local roof of the house building has greatly exceeded 50 degrees, or the house is built on the cornice, at this time, the anti-corrosion tile should also be used for reinforcement;

2. When the crust movement in an area is relatively frequent, there will be frequent earthquakes or wind blows, when PVC anti-corrosion tiles are used, they must be reinforced.

According to the place where the anti-corrosion tile is used, proper reinforcement of the anti-corrosion tile can not only improve the service life of the anti-corrosion tile, but also ensure the safety of the user to a certain extent. At the beginning, when we are buying anticorrosive tile, how to identify whether it is qualified? Let's take a look at some tips!

1. Visual method

After getting the samples from the anti-corrosion tile manufacturer, observe the tile surface directly with the naked eye. The surface of high-quality anti-corrosion tile is smooth and the grain is very clear. The cut of each tile is very neat and there is no rough phenomenon. At the same time, check the bottom of the tile. The color of the bottom of the high-quality anti-corrosion tile will be uniform and free of impurities.

2. Fire method

Bend the samples of the anti-corrosion tile manufacturer's products with force. If the anti-corrosion tile is of good quality, there will be no trace of being bent, and then use fire to light a corner of the anti-corrosion tile. If the fire goes out immediately after the fire source leaves, the quality of the product is very good.

3. Audiology

The samples provided by the anti-corrosion tile manufacturer are gently knocked by hand. For the high-quality anti-corrosion tiles, the raw materials used are appropriate, and the foam insulation layer is also mixed in the middle, so the sound heard after knocking is dull and thick.

4. Weighing method

As the main material of the anti-corrosion tile is PVC, the proportion is very small. Therefore, when identifying the quality, you can weigh the samples provided by the anti-corrosion tile manufacturer, weigh the anti-corrosion tile of one square meter size, and then calculate its proportion, as long as it meets the standard requirements, it is a good anti-corrosion tile.